Header Image
Home / Resin-XS

Resin-XS

FloraMax Resin-XS

The #1 BLOOM BOOSTER for serious growers

Resin & essential oil booster for plantsResin-XS was designed to meet the critical demands of growers wanting larger yields.  There is no other flowering additive able to compete in terms of quality of yield, cleanliness and ease-of-use.

  • Resin-XS helps improve fruit quality and development.
  • Resin-XS is PGR free.
  • Resin-XS will NOT induce foul residues or odors in the reservoir, nor cause blockages to drippers and filters. The unique ingredients used in Resin-XS are extremely stable thereby resulting in greater reliability and consistency for growers.
  • Available in larger pack sizes – 1L, 5L, 20L, 220L and 1,000L – suitable for large scale commercial applications.
  • Dosage: 3-4 ml/L (11-15 ml/Gal). Use from about the third week in bloom up until harvest.

FAQ
Should I be adding *extra* PK additives to the FloraMax feeding schedule during bloom? No, the PK levels (Phosphorous and Potassium) are optimized with Flowering Enhancer, Resin-XS and the FloraMax base nutrient (VegaFlora AB or Veg-1).  Avoid using Resin-XS during early-bloom as extra PK may negatively impact yields with certain strains.  During mid-to-late bloom, we generally recommend using Resin-XS at 3ml/L (11.5ml/Gal).  However, for heavy feeders, Resin-XS can be used at upwards of 4ml/L (15ml/Gal).

Revolutionary Organic Compounds
Resin-XS-impact-on-trichome-developmentOrganics are usually supplied to a plant using an indirect animal or plant source such as guano, fish emulsions, kelp meal, etc.  These organic sources can contain hundreds of different organic molecules and the majority of these molecules either provide no nutrient-effect to plants, or act as nuisance chemicals that may cause foaming in the reservoir, biological build-ups, biofilms, odors or blocked drippers, etc.  Furthermore, where beneficial molecules do exist in these organic sources, their concentration is often unreliable and fails to provide consistent benefit to the plant, especially where fast, predictable cropping speed is required.
How does Floramax differ?  Over half of the FloraMax additives contain organics, but as analytical chemists, we have been able to isolate specific ‘beneficial’ organic molecules and incorporate them into our additives in a direct, purified, and potent form.  This enables their concentrations to be optimized for maximum nutrient effect with no negative side-effects.  The result is a range of products that produce unique and tangible results without reservoir foaming, build-ups, odors or blockages.

Testimonials - “When the trichomes pushed out there was easily a third more than normal...

“When the trichomes pushed out there was easily a third more than normal”.

“What I really enjoy about using your line though is that the buds do not have a PGR look to them and they look natural almost organic in their structure.  Secondly the bud sites are huge and filled with resin!  (USA Commercial consultant)

“I have gone past all previous returns and if there is better quality i haven’t seen it. So obvious”

“Unreal…not going to go on…tooo big now…can’t go into the final week, just tooo big….”

“At the start of the week i thought really nice, everything is producing…then that week it just got huge…best ever. Its amazing, already the overall production is fantastic. The resin is very high and i think better than i have seen in the past”

“The Resin-XS goes well with everything, nice balance in the barrel and now just the most amazing forest green and in 100 percent blooming health. The touch is fantastic, the smell is so earthy and organic and the structure is so solid”

Resources
How to prune and train plants to achieve higher yields?
To obtain higher yields, the most productive indoor growers manipulate their plants into a low, wide and flat canopy with multiple flowering sites at the ‘same’ vertical height. This allows a larger proportion of your plant to bask in the “sweet zone” enjoying optimum light levels within a temperature range that is ideal for photosynthesis.

This ‘form’ can be achieved through a combination of “topping” followed by Low Stress Training (LST):

  1. Topping is effectively used to obtain multiple, even-sized floral sites.
  2. LST is then used to bring these floral sites to the same height to maximize grow lamp efficiency.

STEP 1. Topping. When and how to ‘top’?

Topping is best done when the plant is very young (less than 2-3 weeks old) and has only 2-5 nodes in total. Topping is the removal of the plants ‘top’ growth just above a node (fig 2). Once topped, the two axillary buds immediately below the cut will then grow out into two new branches. Once these new branches grow out to 1 or 2 leaf sets (or nodes) they can be topped again. This second round of topping will grow out to form four even-sized branches.

Read the full article on Topping & LST.

Top